12
| English
1 609 92A 06V | (7.4.13)
Bosch Power Tools
Planer Safety Rules
Wait for the cutter to stop before setting the tool down.
An exposed rotating cutter may engage the surface leading
to possible loss of control and serious injury.
Hold the power tool by insulated gripping surfaces on-
ly, because the cutter may contact its own cord.
Cutting
a “live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
Use clamps or another practical way to secure and sup-
port the workpiece to a stable platform.
Holding the
work by your hand or against the body leaves it unstable
and may lead to loss of control.
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance.
Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
Do not reach into the saw dust ejector with your hands.
They could be injured by rotating parts.
Apply the machine to the workpiece only when
switched on.
Otherwise there is danger of kickback when
the cutting tool jams in the workpiece.
When working, always hold the planer in such a manner
that the planer base plate faces flat on the workpiece.
Otherwise the planer can become wedged and lead to inju-
ries.
Never plane over metal objects, nails or screws.
The
planer blade and the blade shaft can become damaged and
lead to increased vibrations.
Products sold in GB only
: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only
: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for planing of firmly supported
wooden materials, such as beams and boards. It is also suita-
ble for beveling edges and rebating.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Planing depth scale
2
Depth adjustment knob (insulated gripping surface)
3
Sawdust ejector
4
On/Off switch
5
Lock-off button for On/Off switch
6
Planer base plate
7
V-groove
8
Handle (insulated gripping surface)
9
Blade drum
10
Clamping element for blade
11
Fastening screw for planer blade
12
Carbide blade (TC)
13
Allen key
14
Extraction hose (Ø 35 mm)*
15
Extraction adapter*
16
Chip/dust bag*
17
Parallel guide*
18
Scale for rebating width
19
Locking nut for adjustment of rebating width*
20
Fastening bolt for parallel and beveling guide*
21
Angle stop*
22
Locking nut for angle adjustment*
23
Fastening bolt for rebating depth stop*
24
Rebating depth stop*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 83 dB(A); Sound power level 94 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Planer
PHO 1
Article number
0 603 272 2..
Rated power input
W
500
Output power
W
250
No-load speed
min
-1
19000
Planing depth
mm
1 – 1.5
Rebating depth
mm
0 – 8
Planing width, max.
mm
82
Weight according to
EPTA-Procedure 01/2003
kg
2.0
Protection class
/
II
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
OBJ_BUCH-437-004.book Page 12 Sunday, April 7, 2013 10:58 AM
