4
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2
.
The control panel
Controls
When you touch a symbol, the respective function is activated.
Notes
■
The settings will remain unchanged if you touch several
symbols at once. This allows you to wipe up spills on the
control panel.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
The hotplates
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If
•
appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to
œ
. The display remains lit until the hotplate has
cooled sufficiently.
Setting the hob
This section informs you how to set the hotplates. The table
shows heat settings and cooking times for various meals.
Switching the hob on and off
The main switch is used to switch the hob on and off.
To switch on: touch the
#
symbol. The indicator above the
main switch and the
$
hotplate indicator light up. The hob is
ready for use.
To switch off: touch the
#
symbol until the display above the
main switch and the hotplate indicators
$
go out. All hotplates
are switched off. The residual heat indicator remains on until
the hotplates have cooled down sufficiently.
Note:
The hob switches off automatically if all hotplates have
been switched off for more than 15 seconds.
&RQWUROVIRU
$
HOHFWURQLFERLO
VWDUWFRQWURO
Í
DFWLYDWLRQ
'LVSOD\VIRU
KHDWVHWWLQJ
³
É
UHVLGXDOKHDW
¤
&RQWUROIRU
KRWSODWHVHOHFWLRQ
&RQWUROVIRU
PDLQVZLWFK
ZLSHSURWHFWLRQ
WLPHU
'
FKLOGSURRIORFN
6HWWLQJVUDQJH
IRUVHWWLQJWKHKRWSODWH
IRUVHWWLQJWKHWLPHU
Hotplate
Activating and deactivating
$
Single-circuit hotplate
ò
Tri-circuit hotplate
Select the hotplate, touch the
ð
activation symbol; the 2nd filament circuit is activated
Touch the
ð
activation symbol again; the 3rd filament circuit is activated
When the hotplate is activated: the corresponding display lights up.
When the hotplate is switched on: the last selected size is automatically selected again
