Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
en
Automatic safety cut-out
12
Note:
You can change the cooking time for a hotplate
or switch off the automatic timer for the hotplates:
Select the hotplate and touch the
y
symbol. Change
the cooking time or set to
‹‹
in the settings range.
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
To activate it the hob must be on.
Setting the kitchen timer
1.
Touch the
t
symbol.
h
above the
t
symbol lights
up brightly.
‹‹
lights up in the timer display.
2.
Set the desired time in the settings range.
The timer starts counting down after a few seconds.
When the time has elapsed
When the time has elapsed, you will hear an audible
signal and
‹‹
flashes in the timer display for 10
seconds.
h
above the
t
symbol flashes. Touch any
symbol. The displays go out and the audible signal
ceases.
Setting the correct time
Use the
t
symbol to select the kitchen timer and reset
the time.
Stopwatch function
The stopwatch function displays the time which has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the
stopwatch function is switched off as well.
The stopwatch function is switched on by touching the
x
symbol.
‹‹
appears in the timer display and timing
starts. Seconds are displayed during the first minute,
and then minutes.
Touching the
x
symbol stops the stopwatch. Touching
the
x
symbol one more time switches off the
stopwatch function. The timer display goes out.
b
Automatic safety cut-out
Automatic safety cut-out
If a hotplate has been switched on for a long time
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating.
”‰
and the
•
/
œ
residual
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
z
Keep warm function
Keep warm function
The Keep warm function is suitable for melting
chocolate or butter and for warming food and cookware
Switching on the Keep warm function
1.
Select the hotplate.
2.
Touch the
Û
symbol.
–©
lights up on the heat
setting display.
The Keep warm function is switched on.
Switching off the Keep warm function
1.
Select the hotplate.
2.
Touch the
Û
symbol.
‹
lights up on the heat
setting display.
The Keep warm function is switched off.
k
Wipe protection
Wipe protection
If you wipe over the control panel while the cooktop is
switched on, settings may be altered.
To prevent this from happening, your cooktop has a
wipe protection function. Touch the
>
Š
symbol. An
audible signal sounds. The
>
display above the
>
Š
symbol lights up. The control panel is locked for
30 seconds. You can now wipe over the control panel
without altering any settings.
Note:
The main switch is excluded from the wipe
protection function. You can switch off the cooktop at
any time.
[
Energy consumption
indicator
Energy consumption indicator
You can use this function to have the total energy
consumption between switching the hob on and off
displayed.
Once switched off, the consumption in kilowatt hours
(e.g. 1.87 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other
things, on the voltage quality of the power supply.
The display has not been activated. You can find out
how to activate the display in the Basic settings
section.
