Bosch PKM8DV1 Series, Instruction Manual

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

en

    Home Connect

14

Notes

■

Hobs are not designed to be used unattended  - you 

must always keep an eye on the cooking process.

■

Ensure that you follow the safety instructions in this 

instruction manual and that these are also observed 

when operating the appliance via the Home Connect 

app. You must also follow the instructions in the 

Home Connect app.

~

 "Important safety 

information" on page 4

■

Using the Home Connect app, you can send settings 

to your appliance and then have to confirm them on 

the appliance. It is not possible to operate the 

appliance whilst you are away from home.

■

Operation on the appliance always has priority. 

During this time, it is not possible to operate the 

appliance using the Home Connect app.

Setting up

To implement settings via Home Connect, you must 

have installed and set up the Home Connect app on 

your mobile device.
Observe the Home Connect documents supplied for 

this.
Follow the steps specified by the app to make the 

settings.
The app must be open in order to perform the setup 

process.

Automatic registration in the home network

You require a router that has WPS functionality.
You require access to your router.If you do not have 

this, follow the steps for "Manual registration in the 

home network".

1.

Switch on the hob.

2.

Touch the 

t

 symbol for 4 seconds.

Product information will be displayed.

3.

Touch the 

t

 symbol repeatedly until 

•’

 and 

‚

 are 

displayed alternately.

‹

 lights up in the cooking position display.

4.

Set the 

‚

 value on the control panel.

‚

 and the 

D

 symbol will flash on the cooking 

position display.

5.

Press the WPS button on the router within the next 

2 minutes.

The hob is connected to the home network if the 

D

 symbol no longer flashes but is lit up on the 

cooking position display.

Note: 

If a connection cannot be established, the 

"Connect manually" 

ƒ

 value appears.Register the 

appliance in the home network manually or try 

connecting automatically again.

The appliance automatically tries to connect to the 

app, and 

•’

 and 

ƒ

 are displayed alternately.The 

‚

 value flashes on the control panel.

6.

On your mobile device, follow the instructions in the 

app for automatic network registration.

The log-in procedure has been completed once the 

‹

 value appears in the cooking position display.

Manual registration in the home network

1.

Switch on the hob.

2.

Touch the 

t

 symbol for 4 seconds.

Product information will be displayed.

3.

Touch the 

t

 symbol repeatedly until 

•’

 and 

‚ 

 are 

displayed alternately.

‹

 lights up in the cooking position display.

4.

Set the 

ƒ

 value on the control panel.

ƒ

 and the 

D

 symbol will flash on the cooking 

position display.

W

W

W

W