Bosch PKM8DV1 Series, Instruction Manual

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

en

    Home Connect

16

2.

Touch the 

t

 symbol repeatedly until 

•’

 and 

„

 are 

displayed alternately.

‚

 lights up in the cooking position display.

3.

Set the 

‹

 value on the control panel.

WLAN is deactivated and the 

D

 symbol on the control 

panel goes out.

Disconnecting from the network

Disconnecting from the network

You can disconnect your hob from the network at any 

time.

Note: 

If your hob is disconnected from the network, it is 

not possible to operate it using Home Connect.

1.

Touch the 

t

 symbol for 4 seconds.

Product information will be displayed.

2.

Touch the 

t

 symbol repeatedly until 

•’

 and 

‚

 are 

displayed alternately.

„

 lights up in the cooking position display.

3.

Set the 

‹

 value on the control panel.

The appliance is disconnected from the home network 

and the 

D

 symbol on the control panel goes out.

Connecting to the network

Connecting to the network

1.

Touch the 

t

 symbol for 4 seconds.

Product information will be displayed.

2.

Touch the 

t

 symbol repeatedly until 

•’

 and 

‚

 are 

displayed alternately.

‹

 lights up in the cooking position display.

3.

On the control panel

set the "Connect automatically" 

‚

 value or

or the "Connect manually" 

ƒ

 value.

4.

Follow the instructions in the section entitled 

"Automatic registration in the home network" or

"Manual registration in the home network".

Connect to the app

If the Home Connect app is installed on your mobile 

device, you can connect it to your hob.

Notes

■

The appliance must be connected to the network.

■

The app must be open and be set up.

■

If your extractor hood is directly connected, first 

disconnect the hob from your home network and 

then initiate the connection process 

again.

~

 "Disconnecting from the network" 

on page 16

~

 "Connecting to the network" 

on page 16

1.

Touch the 

t

 symbol for 4 seconds.

The product information will be displayed.

2.

Touch the 

t

 symbol repeatedly until 

•’

 and 

ƒ

 are 

displayed alternately.

‹

 will be lit on the hotplate display.

3.

Set the value 

‚

 in the settings area.

4.

Follow the instructions in the app to complete the 

connection process.

Settings via app

Using the Home Connect app, you can easily access 

the basic settings for your hob and send settings for the 

cooking positions to the hob.

Notes

■

To change basic settings the hob must be switched 

off.

■

Operation on the appliance always has priority. 

During this time, it is not possible to operate the 

appliance using the Home Connect app.

■

The transfer of settings is activated when the 

appliance is supplied.

■

If the transfer of settings has been deactivated, only 

the hob's operating statuses will be displayed in the 

Home Connect app.

1.

Touch the 

t

 symbol for 4 seconds.

Product information will be displayed.

2.

Touch the 

t

 symbol repeatedly until 

•’

 and 

…

 are 

displayed alternately.

3.

To activate the transfer, select the 

‚

 value on the 

control panel; to deactivate the transfer, select the 

‹

value.

W

W

W

W