Bosch PKM8DV1 Series, Instruction Manual

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Cleaning    

en

19

Note: 

Connection can only be established when both 

appliances are connected to your home network and 

the connection process has been initiated for both of 

them. If the connection process has already timed out 

for one of the two appliances, try to connect again 

(basic settings, 

™‚‡

 setting).

Resetting connection

You can reset the connections saved on your home 

network and the extractor hood at any time.

1.

Touch the 

t

 symbol for 4 seconds.

Product information will be displayed.

2.

Touch the 

t

 symbol repeatedly until 

‡

 and 

™‚

 are 

displayed alternately.

3.

Set the 

‹

 value on the control panel.

Control the hood via the hob

In the basic settings of your hob you can adjust the 

behaviour of your extractor hood depending on the 

switch-on/off of the hob or individual cooking zones. 

~

 "Hood control settings" on page 19

You can select other settings using the control panel.

Setting the fan

Switching on

Touch the 

:

 symbol.

Setting fan level

Select the fan setting.
You can choose between the levels 1, 2 and 3. To 

select the levels Boost and PowerBoost, touch buttons 

4 or 5, or touch the 

á

 button repeatedly until the 

required intensive level is set.

Switching off

Select fan level 0.

Setting automatic mode

Switching on

Touch the 

:

 symbol until the 

>

 symbol appears on the 

control panel.
The fan starts up automatically when steam is 

produced.

Switching off

Touch the 

:

 symbol until the 

>

 symbol goes out, or 

select another fan level.

Setting the hood lighting

You can switch the hood light on and off via the hob's 

control panel.
Touch the 

<

 symbol.

Hood control settings

Hood control settings

You can adapt the hood controls to suit your needs at 

any time.

Note: 

The 

™‚‰

, 

™ƒ‹

, 

™ƒ‚

 and 

™ƒƒ

 settings are only 

displayed if the appliance is connected to an extractor 

hood.

D

Cleaning

Cleaning

Suitable maintenance and cleaning products can be 

purchased from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills 

from burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for glass 

ceramic. Follow the cleaning instructions on the 

packaging.

Symbol

Function

™‚‡

Hob-hood connection

‹

Not connected / disconnect.

‚

Connect.

ƒ

Connected to home network (WLAN).

„

Connected to extractor hood.

™‚‰

Automatic fan switch-on

‹

Switched off.
The hood must be switched on manually if needed.

‚

Switched on in automatic mode.*
In automatic mode, the hood switches itself on when a 

cooking zone is switched on.

ƒ

Switched on in manual mode.
The hood switches itself on with a default setting when a 

cooking zone is switched on.

™ƒ‹

Fan run-on

‹

The fan switches itself off when the hob is switched off.

‚

Switched on in automatic mode.*

ƒ

Switched on with standard fan run-on.

„

No change in settings.

™ƒ‚

Switch light on automatically

‹

Switched off.

‚

Switched on.*
The light switches itself on when the hob is switched on.

™ƒƒ

Switch light off automatically

‹

Switched off.*

‚

Switched on.
The light switches itself off when the hob is switched off.

* Basic setting