English |
19
Bosch Power Tools
1 609 92A 0SU | (21.11.14)
– Set the circular saw with the premounted guide-rail adapt-
er
27
on to the guide rail
28
.
– Adjust the desired cutting depth and the bevel angle. Ob-
serve the marks on the guide-rail adapter
27
for preadjust-
ment of the various bevel angles; see figure F.
– Align the circular saw with guide-rail adapter in such a man-
ner that the teeth of the saw blade
21
face against the rub-
ber lip. The position of the saw blade
21
depends on the
selected cutting angle. Do not saw into the guide rail.
– Tighten wing bolt
7
to lock the position of the guide-rail
adapter.
– Remove the circular saw with the premounted guide-rail
adapter
27
from the guide rail
28
.
– Align the guide rail
28
on the workpiece in such a manner
that the rubber lip lies exactly alongside the cutting edge.
– Fasten the guide rail
28
with suitable clamping devices,
e. g., screw clamps, on the workpiece. Set the circular saw
with the premounted guide-rail adapter
27
on to the guide
rail.
– Switch the machine on and guide it in the cutting direction
applying moderate and steady feed.
Two guide rails can be connected using the connection piece
29
. Clamping is carried out with the four screws located in the
connection piece.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself, pull the mains
plug.
For safe and proper working, always keep the machine
and ventilation slots clean.
The retracting blade guard must always be able to move freely
and retract automatically. Therefore, always keep the area
around the retracting blade guard clean. Remove dust and
chips by blowing out with compressed air or with a brush.
Saw blades that are not coated can be protected against cor-
rosion with a thin coat of acid-free oil. Before use, the oil must
be removed again, otherwise the wood will become soiled.
Resin and glue residue on the saw blade produces poor cuts.
Therefore, clean the saw blade immediately after use.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
0
1-45
OBJ_BUCH-179-005.book Page 19 Friday, November 21, 2014 10:07 AM
