PRAESENSA
Installation wiring | en
95
Bosch Security Systems B.V.
Underwriters Laboratories Listing Document (ULLD)
2021.12.21 | V0.15b | F.01U.402.882
6.
Place the labels upside down in the label slots and put the label holders back in place.
Slide the metal top side label holder to the right to lock it in place.
7.
Mount the cover back on the extension body by first sliding the bottom side into the
body, then tilt down until it snaps into place.
3.9.6
Mounting a button cap
The call station extension has provisions to add a cap over one or more buttons, as a
safeguard against accidental activation. Each PRA-CSE is delivered with a set of three caps,
each consisting of a white light ring with pivot pins and a red cap with a hinge.
