18
| English
(20)
Handle (insulated gripping surface)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Angle grinder
GWS 670
GWS 670
Article number
3 601 C75 6..
3 601 C75 6..
Rated power input
W
670
670
Rated speed
min
-1
12,000
12,000
Max. grinding disc diameter
mm
100
115
Grinding spindle thread
M 10
M 14
Max. thread length of grinding spindle
mm
17
17
Weight according to EPTA-Procedure 01:2014
– With standard auxiliary handle
kg
1.6
1.6
– With low-vibration auxiliary handle
kg
1.7
1.7
Weight (net)
A)
kg
1.5
1.5
Protection class
/ II
/ II
A) Measured without protective guard or auxiliary handle
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-3
.
Typically the A-weighted noise level of the power tool are:
86
dB(A); sound power level
97
dB(A). Uncertainty K =
3
dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 60745-2-3
:
Surface grinding (roughing):
a
h
=
7.0
m/s
2
, K =
1.5
m/s
2
,
Disc sanding:
a
h
=
4.0
m/s
2
, K =
1.5
m/s
2
.
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Fitting
Fitting Protective Equipment
u
Pull the plug out of the socket before carrying out any
work on the power tool.
Note:
If the grinding disc breaks during operation or the
holding fixtures on the protective guard/power tool become
damaged, the power tool must be sent to the after-sales ser-
vice immediately; see the "After-Sales Service and Applica-
tion Service" section for addresses.
Protective guard for grinding
Place the protection guard
(6)
on the spindle collar. Ad-
just the position of the pro-
tection guard
(6)
to the re-
quirements of the operation.
Lock the protection guard
(6)
by tightening the locking
screw
(5)
using a cross-head
screwdriver.
u
Adjust the protective guard
(6)
such that sparking in
the direction of the operator is prevented.
Note:
The encoding keys on the protection guard
(6)
ensure
that only a protection guard that fits the machine type can be
mounted.
1 609 92A 3SR | (02.06.2021)
Bosch Power Tools
Summary of Contents for Professional GWS 670
