English |
23
(8)
Standard auxiliary handle (insulated gripping sur-
face)
(9)
Vibration-damping auxiliary handle (insulated grip-
ping surface)
a)
(10)
Protective guard for grinding
(11)
Protective guard for cutting
a)
(12)
X-LOCK grinding disc/flap disc
a)
(13)
X-LOCK disc brush
a)
(14)
Cover for cutting
(15)
X-LOCK cutting disc
a)
(16)
X-LOCK diamond cutting disc
a)
(17)
Handle (insulated gripping surface)
(18)
X-LOCK holder
(19)
Hand guard
a)
(20)
X-LOCK backing pad for fibre discs
a)
(21)
X-LOCK fibre disc
a)
(22)
X-LOCK clip for fibre discs
a)
(23)
X-LOCK cup brush
a)
(24)
X-LOCK conical brush
a)
(25)
X-LOCK diamond core cutter
a)
(26)
Extraction guard for cutting with cutting guides
a)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Angle grinder
GWX 18V-8
Article number
3 601 JJ7 0..
Rated voltage
V=
18
Rated speed
A)
min
-1
11,000
Max. grinding disc diameter/
rubber sanding pad diameter
mm
125
Restart protection
●
Weight according to EPTA-Pro-
cedure 01:2014
B)
kg
2.2–3.5
Recommended ambient tem-
perature during charging
°C
0 to +35
Permitted ambient temperature
during operation
C)
and during
storage
°C
–20 to +50
Recommended rechargeable
batteries
GBA 18V...
ProCORE18V...
Angle grinder
GWX 18V-8
Recommended chargers
GAL 18...
GAX 18...
GAL 36...
A) Rated no-load speed for the selection of appropriate application
tools in accordance with EN IEC 62841-2-3. The actual speed is
lower for safety reasons and according to production toler-
ances.
B) Depends on rechargeable battery
(6)
, protective guard (
(11)
,
(10)
,
(14)
) and auxiliary handle (
(8)
,
(9)
) in use
C) Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according to
EN IEC 62841-2-3
.
Typically the A-weighted noise level of the power tool are:
90
dB(A); sound power level
98
dB(A). Uncertainty K =
3
dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN IEC 62841-2-3
:
Surface grinding (roughing) and abrasive cutting:
a
h
=
7.5
m/s
2
, K =
1.5
m/s
2
,
Disc sanding:
a
h
=
2.5
m/s
2
, K =
1.5
m/s
2
.
Grinding thin metal sheets or other materials that tend to easily vi-
brate with a large surface area can cause the noise emission value to
increase by up to 15 dB. Suitable, heavy damping mats can reduce
the increased noise emissions. Increased noise emissions must be
taken into consideration, both for the risk assessment of the noise
output and for selecting suitable hearing protection.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Restart protection
The restart protection feature prevents the power tool from
uncontrolled starting after the power supply to it has been
interrupted.
To
restart
the tool, set the on/off switch
(5)
to the off posi-
tion and then switch the power tool on again.
Bosch Power Tools
1 609 92A 76B | (16.02.2022)
Summary of Contents for Professional GWX 18V-8
