14
| English
1 609 92A 1FM | (1.9.15)
Bosch Power Tools
Troubleshooting – Causes and Corrective Meas-
ures
Maintenance and Service
If the battery charger should fail despite the care taken in
manufacturing and testing procedures, repair should be car-
ried out by an authorised after-sales service agent for Bosch
power tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number on the type plate of the
battery charger.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Cause
Corrective Measure
Red error indicator 5 flashes
No charging procedure possible
Battery not (correctly)
positioned in the L-BOXX
Put the battery in the correct
position in the Wireless
Charging L-BOXX inlay, with
the underside of the battery
facing the base of the
L-BOXX.
Detection of foreign object
An object other than/in
addition to the battery is on
the charging platform
1
(possibly in the L-BOXX)
Remove object
Wrong battery positioned in
L-BOXX
Position a compatible battery
Wrong L-BOXX inlay used (as
a result, the batteries are not
in the correct position)
Use the correct L-BOXX inlay
(recognisable by Wireless
Charging sticker on the
L-BOXX)
Battery pack defective
Replace the battery
Standby indicator (green) 3 does not illuminate
On-board voltage too low
Start engine (charge starter
battery).
Mains plug of battery charger
not plugged in (properly)
Insert mains plug (fully) into
the socket outlet
On-board socket, socket
outlet, mains cable or
charger defective
On-board voltage too low
Check mains or on-board
voltage, have charger
checked if necessary by an
authorised after-sales service
centre for Bosch power tools.
OBJ_BUCH-2572-001.book Page 14 Tuesday, September 1, 2015 9:31 AM
