Bosch Security Systems | 2008-05
6
Step 4: Mount the Speaker Into the Ceiling (Figure 8)
Push the speaker into the ceiling hole until the front baffle rim is flush with the ceiling.
Tighten the mounting tabs by turning the screw clockwise until the speaker is secure.
Please note that the first clockwise quarter turn rotates the attachment tabs outward.
The remaining turns tighten the tabs down onto the back of the ceiling surface (see
Figure 9).
Figure 8:
Mount Speaker into
Ceiling
Figure 9:
Tighten Mounting Tabs
Installation Note: Mounting
Tabs
For each attachment screw, first turn
one half turn counterclockwise to
release the counting tab from its guide.
Installation Note:
See Page 3 for possible installation methods. If 3/8” threaded rod is to be used in a
ceiling tile installation, the threaded rod must be installed to the threaded rigging point
before installing into the ceiling.
