GC6057
DISASSEMBLY & REASSEMBLY ADVICE - STAND
SAFETY CAP 21
COMPLETE TRAY 22
Note: pressure fi xation rubber
through the tray.
SUPERIOR STAND
PRINTED 29)
Remove
screws A (4x)
A 4x
Remove the SUPERIOR STAND and
you will see the respective parts of the
Boiler.
REPAIR INSTRUCTIONS - STAND
- For disassembly, you will need a Torx screwdriver 362 TR T20 x 100
- Be careful of the sharp edges of the stainless steel tray assy. a
thick glove
when
removing the tray assy.
- To avoid damage to the sealings and components of the boiler,
NEVER
clean the
boiler with vinegar, descaling agent or other chemicals.
- The boiler does not contain serviceable parts. Never disassemble and service any
components on the boiler assy.
- The boiler is required to be rinsed after every 10 times usage.
-
ALWAYS
replaced boiler assy (Pos 26) when
• mechanical safety valve at the cap has been activated
• thermal fuse/thermostat at boiler bottom is open
4-5
