2 609 007 735 | (19.3.14)
Bosch Power Tools
24
| English
Prevent dust accumulation at the workplace.
Dusts can easily ignite.
The battery is supplied partially charged. To ensure full battery ca-
pacity, completely charge the battery before using for the first time.
Read the operating instructions of the battery charger.
Apply the power tool to the screw only when it is switched off.
Rotat-
ing tool inserts can slip off.
Adjust the gear switch only when the machine is at a complete stop.
If the gear switch cannot be pushed to the stop, turn the drill chuck a
little.
The battery charge-control indicator indicates the charge condition
of the battery for a few seconds when the On/Off switch is pressed
half or fully through. It consists of a two-colour illuminating LED.
To save energy, only switch the power tool on when using it.
Symbols
The following symbols are important for reading and understanding the op-
erating instructions. Please take note of the symbols and their meaning. The
correct interpretation of the symbols will help you to use the machine in a
better and safer manner.
LED
Capacity
Continuous lighting, green
≥ 30%
Continuous lighting, red
< 30%
Flashing light, red
< 11%
Symbol
Meaning
PSB 1080 LI-2/PSR 10,8 LI-2:
Combination Cordless Drill/
Cordless Drill Driver
Grey-marked area: Handle (insulated gripping
surface)
OBJ_BUCH-2178-002.book Page 24 Wednesday, March 19, 2014 2:25 PM