English |
17
Bosch Power Tools
2 609 003 949 | (28.9.09)
f
Secure the workpiece.
A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
f
Keep your workplace clean.
Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
f
Always wait until the machine has come to
a complete stop before placing it down.
The
tool insert can jam and lead to loss of control
over the power tool.
f
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working.
Damaged cables in-
crease the risk of an electric shock.
f
Products sold in GB only
: Your product is fit-
ted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to
BS 1362).
If the plug is not suitable for your socket out-
lets, it should be cut off and an appropriate
plug fitted in its place by an authorised cus-
tomer service agent. The replacement plug
should have the same fuse rating as the orig-
inal plug.
The severed plug must be disposed of to
avoid a possible shock hazard and should nev-
er be inserted into a mains socket elsewhere.
Products sold in AUS and NZ only
: Use a re-
sidual current device (RCD) with a rated re-
sidual current of 30 mA or less.
Functional Description
Read all safety warnings and all in-
structions.
Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ce-
ramic plates and rubber while resting firmly on
the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw
blade recommendations are to be observed.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1
Lock-off button for On/Off switch
2
On/Off switch
3
Vacuum hose*
4
Vacuum connection
5
Base plate
6
Switch for sawdust blowing device
7
Guide roller
8
Saw blade*
9
“Cut Control” viewing window*
10
“Cut Control” base*
11
Contact protector
12
Handle (insulated gripping surface)
13
Saw blade holder
14
Splinter guard*
15
Lead for the parallel guide
16
Holder for guide roller
17
Screw
18
Scale for mitre angle
19
Parallel guide with circle cutter*
20
Locking screw for parallel guide*
21
Centring tip of the parallel guide*
22
Cutting mark, 0°
23
Cutting mark, 45°
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
OBJ_BUCH-1067-001.book Page 17 Monday, September 28, 2009 8:35 AM
