en
FlexInduction
10
Meat, e.g. chicken portions
6 - 7
-
Fish, breaded or battered
6 - 7
-
1
Without lid
2
Preheat to power level 8 - 8.5
Vegetables, mushrooms,
breaded, beer-battered or tem-
pura
6 - 7
-
Small baked items, e.g. dough-
nuts, battered fruit
4 - 5
-
1
Without lid
2
Preheat to power level 8 - 8.5
8 FlexInduction
The flexible cooking zone allows you to position cook-
ware of any shape or size any way you like. It consists
of four inductors that work independently of each other.
When the flexible cooking zone is in use, only the area
that is covered by cookware is activated.
8.1 Positioning the cookware
The flexible cooking zone can be configured in two
ways, depending on which cookware is used. In order
to guarantee good thermal detection and heat distribu-
tion, we recommend positioning the cookware in the
centre, as shown in the figures.
As a connected cooking zone
Recommended for cooking with just one item of cook-
ware.
¡
Position the cookware depending on the size:
Ø ≤ 13 cm.
Ø > 13 cm.
¡
Recommended oblong cookware
:
As two separate cooking zones
Recommended for cooking with two items of cook-
ware.
You can use the front and rear zone independently of
one another, and set a separate power level for each
zone.
8.2 FlexInduction connect
By default, the flexible zone is configured as two separ-
ate cooking zones. Switch on the following function to
connect the cooking zones:
1.
Select one of the two cooking zones.
2.
Press .
a
The display lights up. The zone is connected.
Notes
¡
¡
If you move or lift the cookware from an active con-
nected cooking zone, an automatic search starts.
Each item of cookware that is found within the cook-
ing zone during this search is heated at the previ-
ously selected power level.
8.3 FlexInduction disconnecting
▶
Touch .
a
The cooking zones are separated and work inde-
pendently of each other.
