en
Cooking assist functions
36
Using the wireless temperature sensor
Attach the temperature sensor to the silicone patch and
align it correctly.
Notes
■
Make sure that the silicone path is completely dry
before attaching the temperature sensor.
■
Position the cookware in such a way that the
temperature sensor is pointing towards the outer
side of the hob.
■
To prevent overheating, the temperature sensor
must not be pointed towards another item of
cookware that is hot.
■
Remove the temperature sensor from the saucepan
after cooking. Store it in a clean, safe place away
from sources of heat.
Cleaning
Do not clean the wireless temperature sensor in the
dishwasher.
You can find information on cleaning the temperature
sensor in the section on
Changing the battery
Changing
the batte
ry
If you press the wireless temperature sensor symbol
and the LED does not light up, the battery is flat.
Changing the battery:
1.
Remove the silicone cover from the lower section of
the casing. Unscrew the screws with a screwdriver.
2.
Remove the upper section of the casing. Take the
old batteries out. Put the new batteries in. Make sure
that the polarity is correct.
Caution!
Do not use metal objects to remove the battery. Do
not touch the contacts.
3.
Put the upper and lower sections of the casing back
together. Make sure that the contact pins are aligned
correctly.
4.
Put the silicone cover back on the lower section of
the temperature sensor casing.
Note:
Only use premium-quality CR2032 batteries.
These have an especially long service life.