en
Cleaning
44
Removing metal grease filter
The metal grease filters filter the grease out of kitchen
steam. To keep them in good working order, the filters
should be cleaned at least once a month.
1.
Take the filter cover off.
Note:
Make sure that the filter cover does not fall
and damage the hob.
2.
Take the metal grease filter and the container out.
Note:
Fat may accumulate in the bottom of the
container. Hold the metal grease filter level to
prevent grease from dripping out.
3.
Press down on the catches on either side of the
container to separate the metal grease filter from the
container.
4.
Empty the container if necessary.
5.
Clean the metal grease filter and filter cover.
6.
After removing the metal grease filter, clean the
inside of the appliance.
Cleaning the metal mesh grease filters
Notes
■
Do not use aggressive, acidic or alkaline cleaning
products.
■
The metal grease filter can be cleaned in the
dishwasher or by hand.
By hand:
Note:
You can use a special degreaser to remove
stubborn dirt (article no. 00311297). This can be
ordered through our online shop.
■
Soak the metal grease filter in hot soapy water.
■
Clean the metal grease filter with a brush and then
rinse it thoroughly.
■
Leave the metal grease filter to drain.
In the dishwasher:
■
Do not clean the metal grease filter together with
tableware if heavily soiled.
■
Place the metal grease filter in the dishwasher,
leaving plenty of space around it. Do not trap the
metal grease filter.
Fitting and cleaning other appliance components
Also clean the inside of the hob extractor system
regularly. You can use a special degreaser to remove
stubborn dirt (article no. 00311297).
1.
Take the filter cover off and clean it with a damp
cloth or in the dishwasher.
2.
Take the metal grease filter and the container out.
3.
Press down on the catches on either side of the
container to separate the metal grease filter from the
container.
4.
Empty the container if necessary.
5.
Clean the metal grease filter and the container in the
dishwasher.
