Bosch PXX8 D3.E Series, Instruction Manual

en

    Operating the appliance

16

Selecting a hotplate and heat setting

The hob must be switched on.

1.

Touch the 

ã

 symbol for the required hotplate.

The 

‹

.

‹

 display gets brighter.

2.

Then select the required heat setting from the 

settings range.

The heat setting is set.

Changing the heat setting

Select the hotplate and then set the required heat 

setting in the control panel.

Switching off the hotplate

Select the hotplate and set it to 

‹

.

‹

 in the settings 

range. The hotplate switches itself off and the residual 

heat indicator appears.

Notes

■

If no pan has been placed on the hotplate, the 

selected power level flashes. After a certain time has 

elapsed, the hotplate switches off.

■

If a pan has been placed on the hotplate before 

switching on the hob, it will be detected within 

20 seconds of pressing the main switch and the 

hotplate will be selected automatically. Once 

detected, select the power level within the next 

20 seconds or the hotplate will switch off.

If more than one pan is placed on the hob, only one 

will be detected when switching it on.

Switching the ventilation system on and off

Note: 

Always adjust the setting according to the current 

conditions. To eliminate strong cooking smells, select a 

high fan setting.

Note: 

If no metal grease filter is available, the ventilation 

system cannot be switched on. Insert the metal grease 

filter. The hob functions are also available if there is no 

metal grease filter.

~

 "Cleaning" on page 41

Note: 

Do not obstruct the ventilation openings. Do not 

place objects on the filter cover, as this will reduce the 

power of the ventilation system.

Switching on the ventilation system

Note: 

 If the 

:

 and 

w

 symbols are not available, insert 

the metal grease filter correctly.

~

 "Cleaning" 

on page 41

The 

:

 and 

w

 symbols are available. The ventilation 

system can be switched on.

1.

Touch the 

:

 symbol.

The ventilation system will start at fan setting 

ƒ

. The 

setting that is selected will be displayed in the 

settings area.

Notes

– Heat settings cannot be changed while the 

ventilation system setting is being applied.

– During a period of a few seconds, a fan setting 

for the ventilation system can be selected. The 

settings area can then be used for the heat 

settings again.

2.

Select the required setting from the settings area.

The setting that is selected will be displayed in the 

settings area.

Selecting the fan setting

1.

Touch the 

:

 symbol.

The ventilation system will start at fan setting 

ƒ

. The 

setting that is selected will be displayed in the 

settings area.

2.

Select the required setting from the settings area.

The setting that is selected will be displayed in the 

settings area.

Switching off the ventilation system

If you want to switch off the appliance, touch the 

#

 symbol. If you only want to switch off the ventilation 

system, proceed as follows:

1.

Touch the 

:

 symbol.

2.

Select the 

‹ 

 symbol in the settings area.

3.

Touch the 

:

 symbol to switch to the setting area for 

the hob.

Note: 

The run-on will start once the appliance has been 

switched off (depending on the basic settings selected).