en
Assist
16
Green beans
100
15-30
Cooking in a pressure cooker
Meat
Chicken
120
15-25
Veal
120
15-25
Vegetables and legumes
Vegetables
120
3-6
Chickpeas
120
25-35
Lentils
120
10-20
Beans
120
25-35
Potatoes
Potatoes
120
10-20
Sweet potatoes
120
10-20
Pasta and cereals
Rice
120
6-8
Brown rice
120
12-18
Soups
Home-made broths
120
20-30
Fry with a large amount of oil
Use the lid to heat the oil, and remove it to fry the food.
Meat
Chicken pieces
180
10-15
Meatballs
180
10-15
Fish
Fish, breaded, battered
180
10-15
Vegetables and legumes
Vegetables, breaded, battered
180
4-8
Mushrooms, breaded or
battered
180
4-8
Desserts
Jam-filled doughnuts and
doughnuts
180
5-10
Frozen products
Chips
180
4-8
14.3 Wireless cooking sensor
To use PerfectCook Sensor, you must purchase a wire-
less cooking sensor.
You can purchase the wireless cooking sensor from
customer service, in our online shop or in a specialist
shop www.bosch-home.com.
Connecting the wireless cooking sensor
To connect the wireless cooking sensor to the control
panel, proceed as follows:
1.
Select the basic setting . Basic settings
→
a
lights up.
2.
Select the cooking zone whose display lights up. A
signal tone sounds.
flashes.
3.
Briefly press the centre of the wireless cooking
sensor within 30 seconds.
‒
After a few seconds, the status of the connection
between the cooking sensor and the control
panel appears on the cooking zone's visual dis-
play.
Result
Connected
correctly
PerfectCook Sensor is available.
Not con-
nected cor-
rectly
Communication error
¡
Repeat the connection process.
If the result is still , contact
customer service.
Not con-
nected cor-
rectly
Communication error
¡
Bluetooth communication error.
Repeat the connection process.
¡
You have not pressed the
centre of the wireless cooking
sensor within 30 seconds of se-
lecting the cooking zone. Re-
peat the connection process.
¡
The battery in the wireless
cooking sensor is flat. Replace
the battery, reset the wireless
cooking sensor and repeat the
connection process.
Resetting the wireless cooking sensor
1.
Press the centre of the cooking sensor for approx. 8
- 10 seconds.
a
During this process, the LED display for the wireless
cooking sensor lights up three times.
a
When the LED lights up for the third time, it will start
to reset the temperature sensor.
2.
Now stop pressing the centre of the wireless cook-
ing sensor.
a
As soon as the LED goes out, this means that the
wireless cooking sensor has been reset.
3.
Repeat the connection process from point 2.
Setting the boiling point
The point at which water starts to boil depends on the
height of your home above sea level. If the water is
boiling too vigorously or not vigorously enough, you
can adjust the boiling point. Proceed as follows:
Select the basic setting . Basic settings →
Height
Setting value
0 m
100 - 200 m
200 - 400 m
1
400 - 600 m
600 - 800 m
800 - 1000 m
1000 - 1200 m
1200 - 1400 m
Over 1400 m
1
Basic setting
Note:
The temperature of 3/100 ºC is sufficient to cook
efficiently but, to set more intensive cooking, a lower
level can be selected.
