6�3
Key functions
The operation of the device is divided into 2 levels:
•
Parameter level: For configuration of all operating parameters (
7).
•
User level: Allows access to the basic functions of the unit
(depending on software version).
All entries are made exclusively via the 4 front-panel keys or various key combinations.
Regular mode:
Incr /
Abs
Press shortly = switching from absolute to incremental dimension
Press shortly = activate tool offset (in absolute mode)
An activated tool offset is indicated by the digit "1" in the upper display frame.
F
+
Press shortly = set to reference value (in absolute mode)
Press for 3 seconds = change reference value
Return to regular mode with the Incr/Abs key
F
+
Press shortly = set to "0" (in absolute mode)
Press for 3 seconds = change tool offset
Return to regular mode with the Incr/Abs key
F
+
Incr /
Abs
Press for 3 seconds = call up the parameter level
Parameter level:
Press shortly = select decade
Press shortly = increase decade
Incr /
Abs
Press shortly = save changes and switch over to next parameter
F
Entry of negative parameters
(negative sign only possible if value is unequal to 0)
F
+
Incr /
Abs
Press for 3 seconds = exit the parameter level
NOTE!
P01 is visible if the parameter level is called up. The display switches to the value of P01 if the
key combination
F
+
Incr/Abs
is released. When switching the parameters with the
Incr/Abs
key, the selected parameter (e.g. "P05") is displayed for the duration of holding the key.
The display switches to the respective value if the
Incr/Abs
key is released.
Table 2:
Key functions
10/18
Bosch Rexroth AG
IMScompact position display | R320103179/2019-12
