18
Cleaning, Disposal and Environmental Protection
18.1
Cleaning
Softly wipe the surface with a dampened cloth using a diluted neutral
detergent or alcohol, and then wipe the surface again with a dry cloth. For
systems without a fan, use a compressor or vacuum cleaner to blow off the
accumulated dust in the ventilating channel of the housing and inside the
housing.
Do not use a compressor or vacuum cleaner on systems with a
fan. Remove the fan before cleaning the system.
18.2
Disposal
Products
Our products can be returned to us free of charge for disposal. It is a
precondition, however, that the products are free of oil, grease or other dirt. In
addition, when returned the products must not contain any undue foreign
matter or foreign component.
Please send the products free domicile to the following address:
Bosch Rexroth AG
Bgm-Dr.-Nebel-Str. 2
97816 Lohr a.Main
Germany
Packaging Materials
The packaging materials consist of cardboard, wood and polystyrene. They
can be easily recycled. For ecological reasons you should not return the
empty packages to us.
18.3
Environmental Protection
No Release of Hazardous Substances
Our products do not contain any hazardous substances that they can release
in the case of appropriate use. Normally there are not any negative effects on
the environment to be expected.
Materials Contained in the Products
●
Electronic Devices
Electronic devices mainly contain:
–
steel
–
aluminum
–
copper
–
synthetic materials
–
electronic components and modules
●
Motors
Motors mainly contain:
–
steel
NYCe 4000 Multi-axis motion control system Hardware Sys‐
tem Manual
227/233
Cleaning, Disposal and Environmental Protection
R911337671_Edition 18 Bosch Rexroth AG
