8/56
Safety instructions
Bosch Rexroth AG
, A10VER Series 52, RE 91706-01-B/09.2015
2 Safety instructions
2.1 About this chapter
The axial piston unit has been manufactured according to the generally accepted
rules of current technology. There is, however, still a danger of personal injury
or damage to equipment if this chapter and the safety instructions in this
documentation are not complied with.
▶
Read this documentation completely and thoroughly before working with the axial
piston unit.
▶
Keep this documentation in a location where it is accessible to all users at all times.
▶
Always include the required documentation when you pass the axial piston unit
on to third parties.
2.2 Intended use
Axial piston units are hydraulic components, meaning that in their application they
are classified neither as complete nor as incomplete machines in the sense of the
EC Machinery Directive 2006/42/EC. A component is exclusively intended to form an
incomplete or a complete machine together with other components. The component
may only be commissioned after it has been installed in the machine/system for
which it is intended and the safety of the entire system has been established in
accordance with the machinery directive.
This product is intended for the following use:
The axial piston unit is designed solely as a hydraulic motor in hydrostatic fan drives
in open circuit.
▶
Observe the technical data, the application and operating conditions and
the performance limits as specified in data sheet 91706 and in the order
confirmation. Information about approved hydraulic fluids can be found in data
sheet 91706.
The axial piston unit is only intended for professional use and not for private use.
Intended use includes having read and understood the complete documentation,
especially chapter 2 “Safety instructions” on page 8.
2.3 Improper use
Any use other than that described as intended use shall be considered as improper
and is therefore impermissible.
Bosch Rexroth AG is not liable for damages resulting from improper use. The user
bears all risks from improper use.
The following foreseeable forms of misuse shall also be considered to be improper
(this list does not claim to be exhaustive):
•
Use outside the operating parameters approved in the data sheet or in the order
confirmation (unless specifically approved by the customer)
•
Use of non-approved fluids, e.g., water or polyurethane components
