Disposal
47/56
RE 93223-01-B/09.2020, A21VG Series 10, Bosch Rexroth Corporation
12 Disposal
Careless disposal of the axial piston unit, the hydraulic fluid and the packaging
material could lead to pollution of the environment.
Observe the following points when disposing of the axial piston unit:
1.
Completely empty the axial piston unit.
2.
Dispose of the axial piston unit and packaging material in accordance with the
national regulations in your country.
3.
Dispose of the hydraulic fluid according to the national regulations of your
country. Also observe the applicable safety data sheet for the hydraulic fluid.
4.
Remove the axial piston unit into its individual parts and properly recycle these
parts.
5.
Separate according to, for instance:
–
Castings
– Steel
–
Aluminum
–
Non-ferrous metal
–
Electronic waste
– Plastic
– Seals
13 Extension and conversion
Do not modify the axial piston unit and/or its assembled parts.
Changes to settings on the customer side should only be made using
the product-specific setting instructions.
The warranty from Bosch Rexroth only applies to the product as delivered.
The warranty will be voided if the unit is modified or extended.
Adjusting the setting screws will render the warranty void. If you need to change
the settings, please contact your local contact person; you can find their
contact information at
www.boschrexroth.com/addresses
