16/40
General notes on damage to material and the product
Bosch Rexroth AG
, Manifold block type AGEV1-48404-AA/HM/L01H01-XC, RE 62272-B/03.19
3 General notes on damage to material and
the product
The warranty only applies to the delivered manifold blocks.
• Warranty claims will be rejected in the case of improper installation,
commissioning and operation as well as in the case of use not in accordance with
the intended purpose and/or improper handling.
NOTICE
Impermissible mechanical loading!
Impact or shock forces on built-on valves and components may damage or even
destroy them.
▶
Do not place/put the manifold onto the attachment parts.
▶
Never use attachment parts as a handle or step. Do not place/put any objects on
top of it.
▶
Protect the manifold block against mechanical impact.
Dirt and foreign particles!
Risk of damage, wear and malfunctions due to ingress of dirt and foreign particles.
Contamination and metal particles may damage valves and cause leakage.
▶
During installation, ensure utmost cleanliness in order to prevent foreign
particles such as welding beads or metal chips from getting into the hydraulic
lines.
▶
Before commissioning, check that all hydraulic connections are tight and that all
seals and plugs of ports are correctly installed and undamaged.
▶
Take care that no cleaning agents enter the hydraulic system.
▶
Do not use linting cloth for cleaning.
Environmentally harmful hydraulic fluid!
Leaking hydraulic fluid leads to environmental pollution.
▶
Immediately remedy any leakage.
▶
Dispose of the hydraulic fluid in accordance with the national regulations in your
country.
Contact with salt water leads to increased corrosion at the manifold block and
may damage the product. So take suitable corrosion protection measures.
