3. Reattach the fan unit after having cleaned or visually inspected the mo‐
tor or after troubleshooting (see guidelines below). Protect all mounting
screws with LOCTITE 243 (screwlock) and reestablish all connections.
When attaching the power supply connector, particularly ensure the fol‐
lowing:
There is a seal between the connector and the plug on the fan. Ensure
that the cable cannot put the plug under tensile load in order to avoid
inadequate tightness of this plug connection. If necessary, attach the
connecting cable in flush direction with the plug and provide strain relief
at a close distance.
4. Check the fan and the air circulation for proper functioning.
5. Record all maintenance measures in the machine maintenance plan.
①
Mounting screws (4 pcs.)
Fig. 12-3:
Fan attachment
Required visual inspections of the fan
Inspection
Interval
Line insulation
As specified in the machine main‐
tenance schedule, however, at
least every 6 months
Attachment of connecting lines
Lining of contact protection
Fan for damage
Attachment of fan
Tab. 12-2:
Visual fan inspection
Notes on troubleshooting
Failure/fault
Possible cause
Possible action
Fan motor not running
Mechanical blockage
Switch off and de-energize the energy storage device and re‐
move the mechanical blockage
Wrong line voltage
Check the line voltage and reestablish voltage supply.
Faulty connection
Correct the connection.
Motor winding interrupted
Exchange the device
Impeller running untrue Imbalance of rotating parts
Clean the device. If there is still an imbalance after cleaning,
exchange the device.
Overtemperature of fan
motor
Ambient temperature too high.
If possible, reduce the surrounding air temperature.
Unallowed operating point
Check the operating point
Inadequate cooling
Improve the cooling system
Please contact your Rexroth sales partner in case of other failures.
Tab. 12-3:
Notes on troubleshooting
62/73
Operation of BA1N energy storage device
BA1N Kinetic Energy Buffer
Bosch Rexroth AG R911393264_Edition 01
Summary of Contents for Rexroth BA1N
