the strip should be not in the film pocket, the strip can be inserted
only up to the first partition of the front panel.
●
Push the strip in the film pocket slowly. Do not kink the paper strip
fig. 4-12 "Replacing slide-in strips" on page 33
Fig.4-12:
Replacing slide-in strips
4.
Insert the strip up to the end position.
5.
Check the front side to see whether the label is over the keys.
If the alignment is not yet perfect, remove the strip, shorten it on the right
side and insert it again.
6.
Cut off the projecting remainder in a way that a later replacement of the
slide-in strip still is possible.
4.3
Keyboard Layout
4.3.1
General Information
In order to ensure the correct functioning of the internal and external keyboard
of the BTV 20, the following points are to be taken into consideration.
The keyboard driver and thus the keyboard layout is already configured in the
desired language under Windows (corresponds the language of the installed
operating system). The connection of the external keyboard, e.g. the PCK03
drawer keyboard is preset when the device is delivered, as well. Changes are
to be made only if a keyboard is connected whose keyboard layout is different
from the preset keyboard language. At the same time the internal foil keyboard
on the front of the BTV 20 is to be newly configured (software). How to realize
such a change is described in the following.
4.3.2
Changing the Keyboard Language
To adapt the external keyboard the following steps are to be realized:
1.
Call the "Keyboard" menu entry in the Windows NT control panel.
Path: Start - Settings - Control Panel - Keyboard
Project Planning Manual | Rexroth MTA 200
Electric Drives
and Controls
| Bosch Rexroth AG
33/135
Machine Operator Terminal BTV 20.4A
External keyboard
Summary of Contents for Rexroth BTV 20.4A
Page 12: ...10 135 Bosch Rexroth AG Electric Drives and Controls Rexroth MTA 200 Project Planning Manual ...
Page 66: ...64 135 Bosch Rexroth AG Electric Drives and Controls Rexroth MTA 200 Project Planning Manual ...
Page 134: ...132 135 Bosch Rexroth AG Electric Drives and Controls Rexroth MTA 200 Project Planning Manual ...
