Bosch Rexroth Corp., Model HAB..-7X,
RA 50175-B/07.2016
2.8
Operator’s obligations
The operator is solely responsible for observing applicable regulations.
Documents included in the scope of supply must be properly kept; they are required by the
surveyor for recurring inspections.
The operator should never attempt to adjust, loosen, or remove the bleeder port plug without
completely depressurizing the system. Installing replacement bleeder plugs not approved or
supplied from the manufacturer is strictly forbidden.
WARNING
Risk of Personal Injury – Risk for personal injury from release of pressurized fluid!
▶
Never attempt to adjust, loosen, or remove the bleeder port plug without completely
depressurizing the system!
WARNING
Risk of Explosion – Never carry out any welding, soldering or mechanical work on the
accumulator vessel!
Risk of explosion during welding and soldering!
▶
Risk of bursting and loss of the operating permission in the case of mechanical working!
▶
Never charge hydraulic accumulators with oxygen or air. Risk of explosion!
▶
Before carrying out any work on hydraulic systems, depressurize the system and secure it
against restarting!
▶
Improper mounting can lead to severe accidents!
Note!
Commissioning must exclusively be carried out by qualified personnel.
Accumulator repairs must be performed by trained hydraulic service personnel experienced
in servicing accumulators. Contact your local authorized distributor for application or repair
assistance.
10
Safety instructions
