RA 50175-B/07.2016,
Model HAB..-7X
,
Bosch Rexroth Corp.
their understanding of the relevant conditions pertaining to the work to be done. Qualified
personnel must observe the subject-specific rules.
2.5
General safety instructions
• Observe the regulations for accident prevention and environmental protection.
• Comply with the local safety provisions and regulations of the country in which the product
is used.
• Make sure to use Rexroth products in perfect working order.
• Strictly observe all instructions on the product.
• Persons, who assemble, operate, disassemble or maintain Rexroth products must not
consume any alcohol, drugs or pharmaceuticals that may affect their ability to respond.
• Use exclusively accessories and spare parts explicitly approved by the manufacturer to avoid
accidents due to improper accessories and spare parts.
• Strictly observe the technical data and ambient conditions specified in the product
documentation.
• Inadequate products installed or used for safety-relevant applications may produce
unintended operating behavior and result in product or property damage. For this reason,
use a product in safety-relevant applications only on condition that such use is specified and
allowed in the corresponding product documentation.
• Prior to commissioning the product, make sure that the end product (e. g. a machine or
line), into which Rexroth products are integrated, perfectly complies with the country-
specific provisions, safety regulations and standards applicable to its use.
2.6
Product and technology-related safety messages
Before commissioning and during operation of hydraulic accumulators, observe the
regulations valid at the place of installation.
The operator is solely responsible for observing applicable regulations.
Documents included in the scope of supply must be properly kept; they are required by the
surveyor for recurring inspections.
WARNING
Risk of Personal Injury – Risk for personal injury from release of pressurized fluid!
▶
Before carrying out any work on hydraulic systems, depressurize the system and secure it
against restarting!
2.7
Personal protective equipment
During operation and maintenance work as well as during installation and removal of the
bladder-type accumulator, always wear the following personal protective equipment:
▶
Heat- or cold-resistant protective gloves
▶
Ear protection
▶
Safety shoes
▶
Perfectly fitting safety goggles
▶
Protective helmet
9
Safety instructions
