2
-2
Bosch Rexroth AG
| Electric Drives and Controls
Rexroth IndraControl VCP 35.2
|
R911323106
/
02
Important Directions for Use
2.1.2
Areas of Use and Application
The small operator terminal VCP 35.2 made by Bosch Rexroth allows
to operate and control machines and installations and serves to visual-
ize the information on the machine/installation to be operated required
by the user.
The small operator terminals VCP 35.2 have been developed for use in
single or multiple-axis control tasks.
Typical applications of the VCP 11 are:
•
Handling and assembly systems,
•
Packaging machines,
•
Printing and paper processing machines and
•
Machine tools.
The VCP 35.2 may only be operated under the assembly, installation
and ambient conditions as described here (temperature, system of pro-
tection, humidity, EMC requirements, etc.) and in the position specified.
2.2
Inappropriate Use
Using the small operator terminal outside of the above-referenced
areas of application or under operating conditions other than described
in the document and the technical data specified is defined as “inappro-
priate use".
The small operator terminal may not be used, if
•
they are subject to operating conditions that do not meet the above
specified ambient conditions. This includes, for example, operation
under water, in the case of extreme temperature fluctuations or ex-
tremely high maximum temperatures or if
•
Bosch Rexroth has not specifically released them for that intended
purpose. Please note the specifications outlined in the general Safe-
ty Guidelines!
The VCP 35.2 may only be used with the accessories and parts speci-
fied in this document. If a component has not been specifically named,
then it may not be either mounted or connected. The same applies to
cables and lines.Operation is only permitted in the specified configura-
tions and combinations of components using the software and firmware
as specified in the relevant function descriptions.
Summary of Contents for Rexroth IndraControl VCP 35.2
Page 63: ......
