8 Standards
The products have been developed according to the German edition of the
standards published at the time of product engineering.
8.1 Standards used
Standard
Description
EN 60 204-1
Safety of machinery - Electrical equipment of machines
EN 61 000-6-4
Generic standards - Emission standard (industrial environ-
ments)
EN 61 000-6-2
Generic standards – Noise immunity (industrial environments)
EN 61 558-2-6
Transformer for 24 V power supply unit, safe separation
EN 60 664-1
Overvoltage category II
EN 61 131-2
24 V output requirements
EN 61 131-2
24 V current supply requirements
EN 60 529
Degrees of protection (including housings and installation com-
partments)
EN 60 068-2-6
Vibration test
EN 60 068-2-27
Shock test
EN 60 721-3-1 and EN 60 721-3-3
Climatic class
Tab. 8-1: Standards used
8.2 CE marking
8.2.1 Declaration of conformity
The electronic products described in the present operating instructions comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC directive 2004/108/EC (valid until 04/19/2016)
EMC directive 2014/30/EU (valid from 04/20/2016)
The electronic products described in the present operating instructions are in-
tended for use in industrial environments and comply with the following require-
ments:
Quality standard (version December 2013) of the Fachgemeinschaft Eingabesysteme (German
association for input systems)
Bosch Rexroth AG
Standards
DOK-SUPPL*-VDPXX.3MTBU-IT03-EN-P
11/37