10.1.3 Bosch design
346 mm (VDP 15.3), 478 mm (VDP 21.3)
420 mm (VDP 15.3), 552 mm (VDP 21.3)
35
43
273
mm (VDP 15.3), 348
mm
(VDP
21.3)
195
mm (VDP 15.3),
270
mm (VDP 21.3)
1
8
56
37
37
①
Visual range of the display
Fig. 10-3: Housing dimensions of the operator displays VDP 15.3 and VDP 21.3 in millime-
ters, Bosch design
10.2 Installation notes
●
Provide a space of 50 mm on all sides for sufficient cooling and cable routing.
●
The LED display on the operator panel must not be covered.
●
Wire all cables in loops. Use strain reliefs for all cables.
●
Install the operator display only vertically, with a max. deviation of ±45°,
measured from the vertical.
●
Do not lay the CDI cables in parallel to motor cables or to other noise sour-
ces, as the CDI connection can be disturbed. Keep the maximum distance
possible from interference sources.
10.3 Mounting
To mount the operator display, proceed as follows:
Bosch Rexroth AG
Mounting, demounting and electric installation
18/37
DOK-SUPPL*-VDPXX.3MTBU-IT03-EN-P
