7-126
Error Messages
Rexroth IndraDrive
DOK-INDRV*-GEN-**VRS**-WA01-EN-P
F2834 Contactor control error
Supported by Supply Unit:
HMV01
The mains contactor could not be switched on or dropped out during
operation.
Cause
Remedy
Mains contactor could not be switched
Replace device
Contactor monitor has detected an error
Replace device
F2834 - Attributes
Display:
F2834
Mess. no.:
F2834 (hex)
F2836 Error balancing monitor/ground fault
Supported by Firmware Variant:
FWA-INDRV*-
MPH02
VRS-MS
FWA-INDRV*-
MPB02
VRS-MS
FWA-INDRV*-
MPD02
VRS-MS
Supported by Supply Unit:
HMV01
Unbalance was detected for supply unit HMV01.1 / converter HCS03
during the loading of the DC bus capacitances.
Cause
Remedy
F2836 is signaled during loading of DC bus ("soft
start")
Replace device
F2836 - Attributes
Display:
F2836
Mess. no.:
F2836 (hex)
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01