![background image](http://html.mh-extra.com/html/bosch/rexroth-lu-2/rexroth-lu-2_assembly-instructions-manual_46205028.webp)
28/54 Installation
Bosch Rexroth AG
, MIT: LU 2, 3 842 358 814/2017-01
8.4 Symbols
used
Table 9: Symbols used
2
1
Connection with T-head bolt and collar nut.
Make sure the T-bolt is in the correct position when inserting and tightening in
the slot. The notch at the end of the bolt indicates the orientation of the T-bolt.
1 = insertion position of the T-head bolt into the nut
2 = clamping position of the T-head bolt into the nut
Tightening torque: 25 Nm
SW13
M
D
= 20Nm
Hex key
SW = screw width ... mm
M
D
= necessary tightening torque … Nm
SW5
M
D
= 8Nm
Hex socket head cap screw key
SW = screw width ... mm
M
D
= necessary tightening torque … Nm
PH3
PZ2
Screwdrivers for cross-head screws
PZ … = Pozidriv screwdriver, size …
PZ … = Phillips screwdriver, size …
gleitmo
585 K
Anti Seize
Lubricate / Lubricate with specifi c grease:
• gleitmo 585 K: gleitmo 585 K, www.fuchs-lubritech.com
• Anti-Seize: Food Grade Anti-Seize/Loctite 8014, www.henkel.com
weiconlock
AN302-43
Please the following as thread locking and sealing means:
• Weiconlock AN302-43: medium strength (detachable), www.weicon.de
The marked parts are not required for the assembly described.
Dispose of the parts or use them for other purposes.
2
1
3
Graphical depiction of assembly sequence.
The numbers correspond to the sequence of assembly, in accordance with
the instructions of the accompanying text.
A
B
C
X
Graphical depiction of components.
The letters denote the components mentioned in the accompanying text.
Detail view from a different direction, for example, on the back or bottom of
the product.
358814_2017_01_EN.indd 28
16.01.2017 13:38:19