![background image](http://html.mh-extra.com/html/bosch/rexroth-lu-2/rexroth-lu-2_assembly-instructions-manual_46205041.webp)
Start-up 41/54
3 842 358 814/2017-01, MIT: LU 2,
Bosch Rexroth AG
9 Start-up
9.1 First-time
operation
CAUTION
Unforeseen movements, falling workpiece carrier
f
Risk of injury caused by unforeseen movements and falling objects.
f
Make sure that the product has been installed correctly by qualifi ed personnel
(see page 8) before starting it up.
NOTICE
Malfunctions due to incorrect assembly and start-up
The product may be damaged or its service life shortened.
f
Start-up requires basic mechanical and electrical knowledge.
f
The product may only be operated by qualifi ed personnel (see page 8).
Operational malfunctions caused by unequal distribution of the lubricant
The product can be damaged; the service life may be adversely affected.
f
Only use 2 equal lubricant pins (do not mix adapter sets).
Different lubricating pins cause unequal distribution through an uneven
fl ow resistance.
f
The difference in length of the lubrication lines should be < 20 mm.
Different lubricating line lengths cause unequal distribution through an
uneven fl ow resistance.
Operational malfunctions due to lack of lubricants
The product can be damaged; the service life may be adversely affected.
f
Ensure the lubrication lines are completely fi lled with lubricant before
the product is put into operation.
• Before fi rst use or re-commissioning of a conveyor system, run a risk assessment
in accordance with DIN EN ISO 12100.
EN
GLISH
358814_2017_01_EN.indd 41
16.01.2017 13:38:19