![background image](http://html.mh-extra.com/html/bosch/rexroth-lu-2/rexroth-lu-2_assembly-instructions-manual_46205048.webp)
48/54
Maintenance and repair
Bosch Rexroth AG
, MIT: LU 2, 3 842 358 814/2017-01
11.4.2
Exchange battery LU 2
Fig. 24:
358 814-52
9
1
2.1
1
)
8.2
2.2
8.1
B
3.2
ø2
CR2450
3V
4
6
5.2
7.1
“Click”
5.1
“Click”
3.1
A
D
E
C
7.2
7.2
Exchange battery LU 2
11.4.3 Replacement
parts
For a list of spare parts, see MT
parts
,
3 842 529 770
.
Please note
:
• If the LED indicators on
the drive and the display
are red, the battery
is empty and must be
replaced.
1.
Remove the connection
cable (A) from the
lubrication unit.
2.
Loosen the union nut
and remove the drive (B)
from the oil container (C).
3.
Open and remove the
battery compartment (D).
1
) No scope of delivery,
simultaneous loosening
of the two locking
mechanisms with any
tool (e.g. welding wire,
paperclip or 2 pens).
4.
Remove the control
board (E).
5.
Exchange the battery
(CR 2450, 3 V).
6.
Install the control board.
7.
Install the battery
compartment.
8.
Install the Antrieb auf
den Ölbehälter (see
page 31 + 32).
9.
Connect the connection
cable to the lubrication
unit.
358814_2017_01_EN.indd 48
16.01.2017 13:38:19