![background image](http://html.mh-extra.com/html/bosch/rexroth-lu-2/rexroth-lu-2_assembly-instructions-manual_46205007.webp)
Safety instructions
7/54
3 842 358 814/2017-01, MIT: LU 2,
Bosch Rexroth AG
1.3.3
Designations
In this documentation, the following designations are used:
Table 4: Designations
Designation
Meaning
LU 2
Automatic lubrication unit from the Rexroth transfer system TS 2
plus
LC 2
Oil container for the automatic lubrication unit LU 2
AS 2/…
Adapter set for the automatic lubrication unit LU 2
2 Safety
instructions
2.1 About this chapter
This product has been manufactured using state-of-the-art technology.
Nevertheless, there is a risk of personal injury and property damage if you do not
observe this chapter and the safety instructions in this document.
f
Read this manual thoroughly and completely before you start working with
the product.
f
Keep these instructions accessible to all users at all times.
f
Always include the operating instructions when transferring this product
to third parties.
2.2
Intended use
The product is an incomplete machine.
This product may be used for the following:
• for installation in a Rexroth transfer system TS 2
plus
for lubrication of the transport
chain.
• for lubrication of
1
belt section BS 2/… or
1
section unit SE 2/…in the drive station.
• for operation with 2
equal
lubrication pins.
• For the environmental conditions see page 53.
The product is strictly intended for professional use and not for private use.
The intended use also implies that you have read and understood this
documentation, especially chapter 2 “Safety”.
EN
GLISH
358814_2017_01_EN.indd 7
16.01.2017 13:38:18