Only completely tightened cap nuts guarantee the specified protec-
tion against water (IP65) and activate the vibration protection.
Adjust the output direction
The adjustable flange sockets can be rotated in a range of 240°.
Do not use any tools (e.g. pliers or screwdrivers) to turn the motor
flange socket. Mechanical damage to the flange socket by tools can-
not be ruled out.
The flange socket can be brought into the desired position by hand due to the
lever effect of the connected plug-in connector.
Procedure:
1. Connect motor power cable to flange socket.
2. Move the flange socket in the desired output direction by turning the con-
nected plug-in connector.
The desired output direction is set.
Each rotation of the flange socket reduces the holding torque in the
set position. To ensure the required holding torque of the flange
socket, the outlet direction should be changed max. 5x!
14/27
Operating instructions
MSK Motors Operation For Potentially
Explosive Areas
Bosch Rexroth AG R911323850_Edition 05
