handling with lifting devices and corresponding To ensure a safe use, these
activities must be carried out by skilled personnel or an instructed person un‐
der guidance of a skilled personnel.
A professional is, who is able to estimate delegated work due to his profes‐
sional education, knowledge and experiance and knows the relevant regula‐
tions. He must be able to realize possible danger and takes suitable safety
measures. A professional must keep the relevant technical regulations.
As additional qualification are needed:
●
Knowledge about wiring of electrical components
●
Knowledge about parameterization of application software
●
Basic knowledge about control engineering
2.5
General Safety Notes
●
Observe the valid regulations about accident prevention and environ‐
mental protection.
●
Heed the safety regulations and instructions of the country in which the
product is used.
●
Use Rexroth products only in proper technical state.
●
Please observe all notes on the product.
●
Persons, who assemble, operate, disassemble or maintain Rexroth
products must not be influenced by alcohol or other drugs which influ‐
ence the reactions.
●
Only use accessories and spare parts which are permitted by the manu‐
facturer to prevent from risk of injury due to unsuitable spare parts.
●
Keep the technical data and environmental conditions specified in the
product documentation.
●
If unsuited products are assembled or used in safety-relevant applica‐
tions, unintendend operation states can occur in the application, which
cause personal or material damage. Only use a product in safety-rele‐
vant applications if this application is particularly specified and allowed
in the documentation of the product.
●
You are allowed to operate the product if it is determined that the final
product (for example a machine or system), in which Rexroth products
are assembled, is according to the country-specific determinations,
safety regulations and standards of the application.
2.6
Product and Technology Dependent Safety Notes
Danger of life, risk of injury, heavy bodily
harm during work on a system which is under
pressure.
WARNING
●
Switch off all power-transmission-components and connections (electric,
pneumatic, hdydraulic) according to the manufacturer´s details and se‐
cure them against restarting.
●
Ensure that the motor-pump-unit is completely depressurized.
●
Do not release any cable connections, connections and components as
long as the motor-pump-unit is under pressure.
Bosch Rexroth AG
DOK-SYTROX-MPA01******-IT02-EN-P
Rexroth Sytronix SvP 70xx Motor-Pump Unit MPA01
20/123
Safety Notes
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
