378
Bosch Rexroth AG
| Tightening Technology
3 608 878 300
System 350
| 3 608 878 300/2019-03
Tightening status
– Rexroth OP/Rexroth OP-BMW:
– 0: NOK
– 1: OK
Exception if
MID61/MID65 evaluation and batch information from
application result
is selected in the configuration for Open Protocol:
In application operation, the evaluation of the application for the
tightening status is applied.
– Rexroth OP-Ford:
– 0: NOK
– 1: OK
– 2: Loosen
– 3: Quality code “Start-up test”
– 4: QCode "(C)CW=0"
– 5: Quality code “TorqL”
The setting
MID61/MID65 evaluation and batch information from
application result
in the configuration for Open Protocol has no
effect.
The value consists of one ASCII character.
ID
11
2
Value range
0 – 5
Presetting
-
Example:
Tightening status
OK
Value
0
1
OK/NOK counter status
Status of the OK/NOK counter.
– 0: if not 1 or 2
– 1: Ch x.y CntOK = 1
– 2: OK/NOK counter not used (not configured)
Rexroth OP/Rexroth OP-BMW: Exception if
MID61/MID65 evaluation
and batch information from application result
is selected in the
configuration for Open Protocol: In application operation, the OK/NOK
counter of the application is applied (parameterized from the job).
The value consists of one ASCII character.
ID
12
2
Value range
0 – 2
Presetting
-
Example:
OK/NOK counter
status
OK/NOK counter not used
Value
2
1
Torque status
– 0: Low
– 1: OK
– 2: High
The value consists of one ASCII character.
ID
13
2
Value range
0 – 2
Presetting
-
Example:
Torque status
High
Value
2
1
Table 6–99:
MID 0061 revision 002
Parameter
Comments
Bytes
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
