3 608 878 300
Tightening Technology |
Bosch Rexroth AG 397
System 350
| 3 608 878 300/2019-03
Power redundancy monitoring
status
– 0: Low
– 1: OK
– 2: High
The value consists of one ASCII characters.
ID
14
2
Value range
0 – 2
Presetting
-
Example:
Power
redundancy
monitoring status
Low
Value
0
1
Tapping status of self-tapping
bolts
The value consists of one ASCII characters.
ID
15
2
Fixed value
0
1
Placeholder value
The value consists of one ASCII character.
ID
16
2
Fixed value
0
1
Placeholder value
The value consists of one ASCII character.
ID
17
2
Fixed value
0
1
Tightening error status
Error bits indicate errors in the tightening system and are generated from
the following bits in the quality code:
– bit 1 (AngTotH): The total angle is above the defined tolerance
window.
– bit 2 (AngTotL): The total angle is below the defined tolerance
window.
– bit 3 (TorqH): The torque is above the defined tolerance window.
– bit 4 (AnglH): The angle is above the defined tolerance window.
– bit 10 (RedH): The redundancy is above the defined tolerance value.
– bit 14 ((C)Cw=0): CCw or Cw deactivated during the tightening.
– bit 15 (TorqL): The torque is below the defined tolerance window.
– bit 18 (Start-up test): Start-up test NOK
– bit 21 (TimeH): The time is above the defined tolerance window.
– bit 23 (En=0): Enable during tightening deactivated.
The value consists of ten ASCII characters.
ID
18
2
Value range
0000000000 – 9999999999
Presetting
-
Example:
Tightening error
status
AngTotH
Value
0000000001
10
Torque (T)
The value is multiplied by 100 and transferred as a whole number
(rounded to 2 decimals).
The value consists of six ASCII characters.
ID
19
2
Value range
000000 – 999999
Presetting
-
Example:
Torque (T)
20,11
Value
002011
6
Table 6–105:
MID 0065 revision 002
Parameter
Comments
Bytes
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
