418
Bosch Rexroth AG
| Tightening Technology
3 608 878 300
System 350
| 3 608 878 300/2019-03
MID 0501 revision 002
MID 0502
Acknowledgement Upload output signal change
Table 6–115:
MID 0501 revision 002
Parameter
Comments
Bytes
This revision outputs the values of the first 16 assignable output signals of the OP PLC module. The output is effected
in the order in which the signals have been stored by the user. The signals can be applied to the OP PLC module
from 1.0–2.7.
Signals
ID
none
Value range
0 (not active) or 1 (active)
Presetting
-
Example:
Signals
The signals can be assigned as desired.
Value
0010010000000001, e.g. AppOut0…AppOut15,
with:
– InCy = 0
– Nok = 0
– Ok = 1
– AppOut3 = 0
– AppOut4 = 0
– CyCmp = 1
– AppOut6 = 0
– AppOut7 = 0
– AppOut8 = 0
– AppOut9 = 0
– AppOut10 = 0
– AppOut11 = 0
– AppOut12 = 0
– AppOut13 = 0
– AppOut14 = 0
– CntOK = 1
16
Data length revision 001
16
Sent by:
superordinate computer
The superior computer acknowledges the change in the output signals (upload change in the output signals,
Note: -
Revision:
001 (supported by Rexroth OP and Rexroth OP-Ford) and Rexroth OP-BMW)
Data field:
is empty, 0 bytes
Possible response:
none
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
