3 608 878 300
Tightening Technology |
Bosch Rexroth AG 469
System 350
| 3 608 878 300/2019-03
In the
PLC assignment table
for a CS, use the RPA filter
CS RPA
. The RPA-filter contains all necessary
signals as well as the correct order for RPA. Proceed as follows:
1.
Select the RPA-filter.
2.
Select all signals by marking and copy them.
3.
Assign the signals to the RPA-filter from the address RPA 0.0.
Example
Input signals:
RPA filter for tightening channel CH 0.1 RPA
– Prog1 to RPA_1.1
– Prog2 to RPA_1.2
– Prog3 to RPA_1.3
– Prog4 to RPA_1.4
– Prog5 to RPA_1.5
– Prog6 to RPA_1.6
– Prog7 to RPA_1.7
– En to RPA_4.0
– SEn to RPA_4.1
– Cw to RPA_4.2
– Ccw to RPA_4.3
– CwLock to RPA_4.4
– CcwLock to RPA_4.5
– ResRs to RPA_4.6
– ResF to RPA_4.7
– SpDck to RPA_5.0
Output signals:
RPA filter for tightening channel CH 0.1 RPA
– Ack1 to RPA_1.1
– Ack2 to RPA_1.2
– Ack3 to RPA_1.3
– Ack4 to RPA_1.4
– Ack5 to RPA_1.5
– Ack6 to RPA_1.6
– Ack7 to RPA_1.7
– Rdy to RPA_4.0
– CyCmp to RPA_4.1
– Ok to RPA_4.2
– Nok to RPA_4.3
– InCy to RPA_4.4
– InCyCcw to RPA_4.5
– CwAck to RPA_4.6
– CwLockAck to RPA_4.7
– CcwAck to RPA_5.0
– CCwLockAck to RPA_5.1
Example
Input signals: RPA filter CS RPA
– Prog0 to RPA_0.0
– Prog1 to RPA_0.1
– Prog2 to RPA_0.2
– Prog3 to RPA_0.3
– Prog4 to RPA_0.4
– Prog5 to RPA_0.5
– Prog6 to RPA_0.6
– Prog7 to RPA_0.7
– En to RPA_1.0
– Cw to RPA_1.1
– Ccw to RPA_1.2
– CwLock to RPA_1.3
– CcwLock to RPA_1.4
– ResRs to RPA_1.5
– ResF to RPA_1.6
– SpDck to RPA_1.7
Output signals: RPA filter CS RPA
– Ack0 to RPA_0.0
– Ack1 to RPA_0.1
– Ack2 to RPA_0.2
– Ack3 to RPA_0.3
– Ack4 to RPA_0.4
– Ack5 to RPA_0.5
– Ack6 to RPA_0.6
– Ack7 to RPA_0.7
– Rdy to RPA_1.0
– CyCmp to RPA_1.1
– Ok to RPA_1.2
– Nok to RPA_1.3
– InCy to RPA_1.4
– InCyCcw to RPA_1.5
– CwAck to RPA_1.6
– CcwAck to RPA_1.7
– CCwLockAck to RPA_2.0
NOTE
Danger to functional safety of the system!
The functional safety of the system is jeopardized by wrong signal order.
When assigning the signals, do not change the signal order specified by the RPA-filter.
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...