514
Bosch Rexroth AG
| Tightening Technology
3 608 878 300
System 350
| 3 608 878 300/2019-03
6.14.1.1
Diagnosis and troubleshooting
For diagnosis, the following two options are available:
•
Detailed text protocol
This protocol can be accessed via BS350 under
System test
Diagnosis
PFCS 2-Port
.
•
Sequence trace
The sequence trace can be accessed via BS350 under
System test
...
FF3
or
FF4
.
•
Via BS350, under
System test
EtherNet...
, the counter values of the PFCS 2-Port diagnostic
counter can be checked on the
PFCS 2-Port diagnostic counter
index card.
list
Filters can be defined for each client. Here, the results and their transmission
connections are defined.
– fastening
– Channel
Single channel result
– FO
Application result
– ApplChan
Channel result, channel is operated in an application.
–
number
Depending on settings in
fastening
:
Channel number or application block number
–
mid
The results data record can be transmitted with another MID. Enter the
respective MID.
– result-modality
Type for transmission of results:
– In job operation:
Definition of when OK or NOK results are to be transmitted during the job
sequence.
– In "non-job" operation:
Results transmission can be suppressed or activated.
Settings
The BS350 operating system provides the option of printing (
Print…
), storing
(
Save as…
) settings for PFCS 2-Port or loading (
Open…
) saved settings.
Protocol
– Activated
Enable the check box to activate data output via PFCS 2-Port.
If results output is disabled, no more results files will be generated. Results files
which have already been generated and still exist will not be output before PFCS
2-Port output has been reactivated.
– Load default values
Click this button to reset the data changes to standard values.
– OK
Click this button to save the data changes.
– Cancel
Click this button to close the dialog window without accepting the changes.
Table 6–192:
Settings in the BS350 for PFCS 2-Port
Element
Description
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
