542
Bosch Rexroth AG
| Tightening Technology
3 608 878 300
System 350
| 3 608 878 300/2019-03
In the following cases, the connection is not cancelled automatically:
•
You are currently active, i.e. you exchange data with the hardware (retrieve or transmit data). This
includes e. g.:
– Transmission of channel configurations, tightening programs or applications to the hardware
– Logon to the system, see figure
– Reading of available tightening programs or -applications from the hardware
– Query of diagnosis data
•
You have opened one of the following views in the BS350:
– Actual value …
– Graph …
– Graph Save …
– Graph Overlay …
In these cases, the connection is not automatically disconnected after 15 minutes as between the
BS350 and KE/CS351 keep alive messages are transmitted on a permanent basis. This is also the
case if no configuration or tightening results data is transmitted.
7.4
Sending and saving
7.4.1
Sending files
Prerequisites for sending files:
•
a connection of the PC to the tightening controller with set-up interfaces (see
)
Prerequisites for sending files:
•
In single-channel operation: a connection between the PC and CS with set-up interfaces
•
In multi-channel operation: a connection between the PC and KE with set-up interfaces
and
•
password entry in the BS350 (see
Logging in to the tightening system (password entry)
)
The following files, among others, can be sent to the controller:
•
to SE/CS:
– One or more tightening programs for this tightening controller
– Tightening channel configuration
– SE/CS PLC assignment table
•
to KE:
– One or more tightening applications
– KE configuration
– KE PLC assignment table
– One or more tightening programs for one or more SEs
– The tightening channel configuration to one or more SEs
– PLC assignment table to one or more SEs
The data is sent by:
•
Data
Send ...
or
•
Data
Send to ...
or
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
