3 608 878 300
Tightening Technology |
Bosch Rexroth AG 551
System 350
| 3 608 878 300/2019-03
Fig. 7–14:
View of the interfaces in the compact system
7.5.2.2
Completing the tightening channel configuration
To delete a component:
Click the appropriate symbol in the configuration sequence and press the [
Del
] button to delete the
component.
To add a component:
Add a permitted component (displayed in black)
.
A distinction is made between two cases:
– If the
new component is to be added to an empty field
then select the empty symbol field in
the configuration sequence and add a permitted component (=displayed in black) from the
component selection into the configuration sequence.
– If the
new component is to be inserted between two components
, then select the component
in the configuration sequence
in front of which
you wish to insert a new element. Then, insert a
component permitted (=displayed in black) within the configuration sequence.
Configuration with standard version
If the tightening channel only contains mechanical components, e.g. an additional drive component on the
ErgoSpinVarioLine, they are inserted in the configuration sequence, but not parameterized. They are
therefore highlighted in red and the message
Check component ______ Set parameters
is displayed.
The same applies for a compact system with tightening spindle (see
). Here, the EC-motor and the
measurement transducer are recognized automatically due to their electronical nameplates, whereas the
mechanical components, e.g. planetary gearbox and straight output drive, have to be parameterized
manually.
NOTICE
Incorrect channel configuration
An incorrectly configured ErgoSpin VarioLine or pistolgrip nutrunner may result in faulty tightenings.
When working with the ErgoSpin VarioLine or pistolgrip nutrunner, always check that the
components stored on the hand-held nutrunner correspond to the actually equipped
components and, if necessary, correct the configuration with the operating program.
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
