590
Bosch Rexroth AG
| Tightening Technology
3 608 878 300
System 350
| 3 608 878 300/2019-03
IMdev
You can make the following settings in the
Set up DeviceNet interface
group:
No settings can be made in the
Configured ranges
field: The grayed out fields cannot be edited. The
parameters displayed in this field depend on the selected number of I/O points.
A participant profile in form of an EDS (electronic data sheet) file is required to commission the IMdev
interface module. The EDS file (
*.
eds
) enables recognition of variable parameters and their value ranges
in the software.
After setting all parameters, create the EDS file by clicking
Create EDS file
. Save the file and import
it into the field bus configurator.
Click
Accept
to take over this data in the configuration for the tightening channel in the BS350.
Table 7–27:
Settings in BS350 for IMdev - I/O and data
Element
Description
MAC ID
Media Access Code Identifier - Interface module address, address range 0 to 63
Baud rate
Transmission rate of 125, 250, 500 kbit/s; in addition, the auto detection function
can be selected
Number of I points
Number of control signals to be processed via the DeviceNet interface: Value range
16 to 512 input signals (2 to 64 bytes)
Number of O points
Number of control signals to be processed via the DeviceNet interface: Value range
16 to 512 output signals (2 to 64 bytes)
Receive data
Memory location for receiving the ID code, max. 254 bytes at 2 bytes for I points
Send data
Memory location for sending results, max. 254 bytes at 2 bytes for O points
Receive IL data
Memory location for receiving IL data, max. 254 bytes at 2 bytes for I points
These data are processed using the IL function block ControlFieldbus.
Send IL data
Memory location for sending of IL data, max. 254 bytes at 2 bytes for O points
These data are processed using the IL function block ControlFieldbus.
Example
If 16I was selected as the number of I points and 32O as the number of O points, 16 inputs (= 2 bytes)
and 32 outputs (= 4 bytes) will also be available in the field bus configurator.
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
