610
Bosch Rexroth AG
| Tightening Technology
3 608 878 300
System 350
| 3 608 878 300/2019-03
7.6.9
Setting the KE time
The time for the KE can be set when it is connected to the BS350. This will automatically set the time of
the connected SEs.
The KE time is logged, e.g. in the course of the tightening results output, enabling times to be assigned
to the tightening results data. To set the KE time, select
System
System time
. The following dialog
opens:
Fig. 7–35:
Setting the KE time
The time zone must be selected from the list (for Germany: see time zone in Figure
). The time will
automatically change to summer or winter time by activating the option underneath the list.
The option
PC time
displays the PC time and date.
Set system time
once synchronizes the KE clock to
the PC clock.
The option
System time
displays the saved KE time and the saved KE date. To make a change, click the
desired digit field and press
or
Information on the time synchronization of the tightening system using the NTP server can be found in the
"Project planning" documentation of the Rexroth Tightening System 350.
7.6.10
Sequence test
The differences from the sequence test of a tightening program in the BS350 (see
) are described here.
To carry out the sequence test for a tightening application, proceed as described in
.
Tightening spindles
clockwise
To start the tightening application to tighten the bolts, select:
•
KE
in the channel selection
•
the application number in the application selection, e.g.
1: Test application
.
•
When
Start
is selected, the tightening application is started.
Tightening spindles
counterclockwise
When
Loosen
is selected, the loosening program (
Ccw
, no. 99) will be started simultaneously in all the
tightening channels in the selected tightening application.
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
