3 608 878 300
Tightening Technology |
Bosch Rexroth AG 631
System 350
| 3 608 878 300/2019-03
Angle compensation is activated by means of a license available on a license stick. Each license stick
contains exactly one license for one tightening channel. For licensing, the license stick can be inserted
into the following slots:
•
At the control unit (SE), the license stick is inserted in the respective channel for the nutrunner in slot
X3U1 or X3U2 and the channel is assigned in the channel configuration.
•
At the CS351 compact system, the license stick is inserted into slot X3U1 or X3U2.
On switching on the system, the availability of valid licenses is checked. An overview of the licenses per
channel can be accessed in menu
System test
Tightening cell info
Licenses.
If the system
recognizes, that a license cannot be read, a buffer period (up to 10 days) is activated. This buffer period
is displayed in menu
System test
Tightening cell info
Licenses
. During this period, the function
has to be deactivated or a valid license inserted.
Free demo period
Angle compensation can be tested for up to 30 days without a license. It can only be activated once for
each channel at each controller. It is activated by means of the channel configuration:
•
Online:
System
Tightening channel configuration CS or SE
The additional function enables activation or deactivation of the 30-day demo period with the
Angle
compensation demo period
checkbox. The checkbox cannot be enabled if the demo period was already
activated or has expired. The license overview shows the remaining runtime. If the period has expired, a
respective error message (FC 3007) is returned.
If the angle head output drive axis is not aligned with the tightening axis, an angle head compensation
error occurs. A deviation of 15° leads to an error of approx. 1.5°.
Fig. 7–48:
Angle head output drive axis of the ErgoSpin hand-held nutrunner and tightening axis
Tightening axis
Angle head output drive axis
Only connect the license stick in de-energized condition.
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...