3 608 878 300
Tightening Technology |
Bosch Rexroth AG 227
System 350
| 3 608 878 300/2019-03
6.2.3.4
Protocol elements of the output
The following tables contain the log elements used. In the illustration, the control characters (
LF
,
CR
…)
are shown as symbol that has the exact width of one letter (e. g. , ). Thus, the character positions for
subsequent characters correspond in the illustration and file.
Parameters (alphabetical)
L
F
C
R
Protocol
element
Meaning
Standard
Standard
Plus 310
Standard 350
R
C
(CR) Carriage return (0x0D)
X
X
X
T
E
X
(ETX) End trigger character (0x03)
X
X
X
F
L
(LF) Line feed (0x0A)
X
X
X
S
O
(SO) Printer control character expanded print off
(0x0E)
X
X
X
T
S
X
(STX) Start trigger character (0x02)
X
X
X
_
Space character
X
X
X
CH
Card rack field no./slot no., e.g. 2.2
X
X
X
D_
System date
(e.g. 1999-03-30 according to ISO 8601)
X
X
X
DP
Docu buffer number (DP)
X
ERG
Tightening result
X
X
X
FO_
Application number (0, 1, …, 48)
X
X
X
G*
Gradient result error [Nm/
°
]
X
G+
Upper gradient limit [Nm/
°
] (floating decimal)
X
X
G<
Upper gradient limit [Nm/
°
] (floating decimal)
X
G>
Lower gradient limit [Nm/
°
] (floating point)
X
GM
Gradient average value of the step
X
X
GM+
Upper limit for gradient average value
X
X
GM–
Lower limit for gradient average value
X
X
GP
Target function Gradient
X
G_
Results gradient as floating decimal number [Nm/
°
] X
X
X
G–
Lower gradient limit [Nm/
°
] (floating point)
X
X
H_
System time (e.g. 11:17:13 according to
ISO 8601)
X
ID-Code
ID code limited to 64 characters max (the ID code
is only output via FTP and not via the printer).
X
X
X
K#
"SYSTEM200 compatible" channel number, e.g. 1 X
X
X
L_
Consecutive tightening no. (1, 2, …, 9999999),
7-digits with leading zeros
X
X
X
M&
Relative torque of a step
X
X
M&+
Upper limit for relative torque
X
X
M&–
Lower limit for relative torque
X
X
M*
Torque result error [Nm] (floating point)
X
M+
Upper torque limit [Nm] (floating decimal)
X
X
M<
Minimum torque of the step [Nm] (floating decimal)
X
X
Lower torque limit [Nm] (floating decimal)
X
M<–
Lower limit for min value
X
X
M-
Lower torque limit [Nm] (floating decimal)
X
M>
Maximum torque of the step [Nm] (floating decimal)
X
X
Upper torque limit [Nm] (floating decimal)
X
M>+
Upper limit for max value
X
X
Summary of Contents for Rexroth Tightening System 350
Page 4: ...4 641 Bosch Rexroth AG Schraubtechnik System 350 3 608 878 300 2019 03 ...
Page 120: ...120 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 194: ...194 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
Page 638: ...638 641 Bosch Rexroth AG Tightening Technology 3 608 878 300 System 350 3 608 878 300 2019 03 ...
